The Duet 3 Expansion board is a CAN-FD connected, high current, full featured expansion board for the Duet 3 mainboards. Pair one of these expansion boards with a Duet 3 Mainboard 6HC or a Duet 3 Mini 5+ to control 3 high current stepper drivers, 3 high current loads, 6 fans and 6 IO channels. Further 3HC expansion boards, tool boards and 1XD expansion boards can be added to the CAN-FD bus if necessary to complete your machine design.
|Processor||Powerful 32bit Atmel ARM Cortex-M4F microcontroller running at up to 120MHz|
|Connectivity||CAN-FD BUS for connection to Duet 3 Mainboards (compatible with the Duet 3 Mainboard 6HC and the Duet 3 Mini 5+)|
|Stepper Drivers||3x TMC2160/5160 high-current drivers with the latest Trinamic features. Maximum motor current 6.3A peak per phase (4.45A RMS)|
|High current outputs||3x5A PWM outputs for extruders and similar|
|Medium current outputs||6 PWM controllable outputs for fans or similar. 3 of these support 4 wire fans including tacho reading|
|IO||6I/O connectors with 3.3V output signal level and 30V-tolerant inputs.|
|Temperature measurement||3 thermistor/PT1000 inputs. Support for two temperature daughterboards for up to 4 PT100 or thermocouple sensors.|
|Supply Voltage||12-48V v1.02 and later; 12-32V v1.01 and earlier|
CAN-FD connected expansion board for the Duet 3 Mainboard that provides connection to an external stepper driver and associated peripherals.
An advanced, high power controller that features 6x 6.3A stepper drivers, 4 high current heaters, 6 fans and more
An advanced, mid range controller that features 5x 2A stepper drivers, 3 high current heaters, 4 fans and more.
The Duet 3 Tool board: a CAN-FD connected expansion board for Duet 3, designed to provide complete control for a direct drive extruder.