Excluding VAT.
PT100 Daughter Board
This is a daughterboard specifically designed for the Duet range of controller boards.
Product description
This is a daughterboard specifically designed for the Duet range of controller boards that supports one or two PT100 temperature sensors in either two or four wire configuration. There are jumpers on the latest version of the board for easily switching between two and four wire mode.
The PT100 Daughter Board is compatible with all Duet 2 and 3 mainboards, along with the Expansion 3HC.
The Duet 3 and Duet 2 mainboards support up to two daughterboards, with a further daughterboards on Duet 3 3HC expansion boards or the on a Duex5 expansion board for Duet 2. With 4 daughter boards a total of 8 PT100 sensors are supported. PT100 and Thermocouple daughterboards can be mixed and matched.
RELATED PRODUCTS
The Smart Effector for delta printers allows the hotend to be used as a Z probe giving fantastic accuracy across the whole delta build area by eliminating the effect of tilt.
The Duet 3 Expansion 1HCL is a CAN-FD connected expansion board.
CAN-FD connected expansion board for the Duet 3 Mainboard that provides connection to an external stepper driver and associated peripherals.
A high power Duet 3 expansion board that features 3x 6.3A stepper drivers, 3 high current heaters, 6 fans and more
An expansion board for the Duet 3 Mini 5+ that provides an additional 2 x TMC2209 stepper motor drivers.
The Duet3D Magnetic Encoder is a precision motor encoder compatible with the Duet 3 Expansions 1HCL
An advanced, high power controller that features 6x 6.3A stepper drivers, 4 high current heaters, 6 fans and more
An advanced, high power controller that features support for 6 external stepper motor drivers, along with similar outputs and IO as the Duet 3 Mainboard 6HC.
An advanced, mid range controller that features 5x 2A stepper drivers, 3 high current heaters, 4 fans and more
The Duet 3 Tool board: a CAN-FD connected expansion board for Duet 3, designed to provide complete control for a direct drive extruder.
This board allows for the connection of up to 4 Duet 3 Toolboards to the Duet 3 Mainboard at one time, greatly simplifying the CAN-FD bus and power wiring.
Plugin ESP32 WiFi module designed for the Duet 3 Mainboard 6HC v1.02
The Ethernet Networking module for a Duet 2 Ethernet Board. It comes with standoffs and pin headers for mounting on PCB socket strips which are also supplied.
Duet 2 is an established and proven 32 bit electronic controller for 3D printers and other CNC machines.
A 5 driver expansion board for the Duet 2 Wifi and Ethernet.
The breakout board allows the connection for up to 5 external drivers to the Duet 2 Wifi, Wifi-EA and Ethernet controllers.
The Duet3D Filament Monitor accurately senses filament movement to detect clogs, filament run out and other extruder issues.
The PanelDue is a colour touch screen controller for the Duet and other 3D-printing electronics that support it.
A distance sensor used as a Z Probe that uses differential modulated Infra Red light
This is a daughterboard specifically designed for the Duet range of controller boards.
This is a daughterboard specifically designed for the Duet 2 and Duet control boards that allows two Thermocouples to be attached.
