Extruder steps per mm

Avatar

By fcwilt 20 April 2017 04:58

Member · 24 comments

Hi,

On a delta machine, when setting the steps per mm for extruders is the movement measured in relation to the output of the extruder or the output of the nozzle?

Thanks.

Frederick


Hardware: He3D K200, AnyCubic K2, Afinibot A2 (all mini-kossels) - all soon to be equipped with DuetWiFi

Avatar

By dc42 20 April 2017 06:49

Administrator · 2,672 comments

It's always the output of the extruder drive.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By fcwilt 20 April 2017 17:45

Member · 24 comments
dc42 wrote

It's always the output of the extruder drive.

Thanks much.

Frederick


Hardware: He3D K200, AnyCubic K2, Afinibot A2 (all mini-kossels) - all soon to be equipped with DuetWiFi