Problem to compile RepRap Ver 1.18.1 firmware

Avatar

By Electra 21 April 2017 10:59

Member · 2 comments

I don't know if there are any better place or forum for this question.
I have problem to compile the source code for RepRap firmware Ver 1.18.1 from Github.

To compile the CoreNG works without any problems, but when I compile the RepRap firmware I got errors :-(
The compiler doesn't found the MessageFormats.h (on row 14 on to file Networks.h) file and I can't found this file on any directory.

Eclipse's "Building project" error code:
C:\Eclipse\Firmware\RepRapFirmware\src\DuetNG\DuetWiFi/Network.h:14:28: fatal error: MessageFormats.h: No such file or directory
#include "MessageFormats.h"


Installed software
==================
- Windows 10 64 bit (with the latest update)
- Eclipse Neon.3
- Arduino 1.8.2 with SAM Boards Ver 1.6.11
- Reprap firmware ver 1.18.1 and CoreNG firmware Ver 1.18


Eclipse are installed at C:\Eclipse\...
Eclipse Workspace are set to C:\Eclipse\Firmware\
I change the path in both Eclipse project (CoreNG & RepRapFirmware) for the compiler to directory

Eclipse/"Project"/"Properties"/"C/C++ Built"/"Settings"/"Tools settings"/"Crosss Settings"/"Path"
New path : C:\Users\"Users"\AppData\Local\Arduino15\Package\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1\bin

Arduino is installed at default directory C:\Program (x86)\Arduino\...

Reprap and CoreNG files are in to directory
C:\Eclipse\Firmware\RepRapFirmware\...

CoreNG files are at directory
C:\Eclipse\Firmware\CoreNG\...

Avatar

By dc42 21 April 2017 15:59

Administrator · 2,672 comments

You are trying to compile development code that is later than version 1.18.1. I suggest you go to https://github.com/dc42/RepRapFirmware/releases and download the sources to 1.18.1 as a zip.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By Electra 22 April 2017 10:47

Member · 2 comments

When I download the ZIP-file from "Master" branch (instead of "Dev") at Github, it works to compile without any errors :-)

Thanks dc42

Avatar

By dc42 22 April 2017 11:50

Administrator · 2,672 comments

Check which version it is - I can't remember whether I updated the master branch at version 1.18 or 1.18.1.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com