help to configure order

Avatar

By njjn2020 16 April 2017 09:08

Member · 14 comments

Hello!  I plan to purchase duet ethernet + small screen for kossel printer.

1) does it support 0.9 stepper motors? 
2) will 0.9 motor on kossel printer give higher precision?

3) what kind of motor with your board will give more printing speed?

4) do you sell in the US?

thank you!

Avatar

By dc42 16 April 2017 15:13

Administrator · 2,672 comments

1. Yes. You should use 24V power with 0.9deg motors, not 12V.

2. Yes

3.  A motor with low inductance. The higher the rated current, the lower the inductance will be, so look for a motor with between 2.0A and 2.4A rated current per phase. For example, 17HM19-2004S. Longer motors will have higher inductance.

See also https://duet3d.com/wiki/Choosing_stepper_motors.

4. Our US distributor is Filastruder.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By njjn2020 17 April 2017 16:47

Member · 14 comments

thank you very much for detailed responce.

i can not find on the site
             1) Mini differential IR height sensor
             2) PanelDue without screen

please advise how to add those items to the cart.

have a great evening!

Avatar

By njjn2020 17 April 2017 20:25

Member · 14 comments

and what for the UK site?
i decided to buy directly from you. thanks!

Avatar

By dc42 17 April 2017 21:07

Administrator · 2,672 comments

You can order those items directly from my escher3d.com web site. But if you are in the US, you'll get them faster if you order them from Filastruder.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By njjn2020 18 April 2017 11:11

Member · 14 comments

well, i have decided that i will ship my order to russia from the uk. it will be faster and cheaper.

is there a way to put
1 duoWiFi (or Ethernet if availeble)
2 pannel duo without screen
3 IR probe

to one order and single shipment (instead of ordering in 3 different places). thank you!

Avatar

By T3P3Tony 18 April 2017 13:38

Administrator · 789 comments

I am sorting out the option to order a DanelDuet w/o screen now on the website, I will write again once its done.

We are currently out of stock of IR probes but I am hopieng we will have some more in stock soon.


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com

Avatar

By njjn2020 18 April 2017 14:52

Member · 14 comments

ok, waiting for the integration result and IR probe availability

Avatar

By njjn2020 19 April 2017 13:01

Member · 14 comments

duet3d site login function does not work.
"The page you requested cannot be found."
link  -  https://duet3d.com/%3C/?php%20echo%20$login;%20?%3E

Avatar

By T3P3Tony 19 April 2017 13:11

Administrator · 789 comments

Will look into this now


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com

Avatar

By adavidm 19 April 2017 13:13

Member · 21 comments

Can you get to it from here:

https://duet3d.com/index.php?route=account/login

?

It looks like a problem with escaping php in the website code.

Avatar

By njjn2020 19 April 2017 13:37

Member · 14 comments

with new link i have created new account

but was unable logon with account i use on forum.  are those the same accounts?

Avatar

By njjn2020 19 April 2017 13:40

Member · 14 comments

"my account"  in the right top corner does not work either.
link is defective (see below)

https://duet3d.com/https://duet3d.com/i … nt/account

Avatar

By njjn2020 19 April 2017 13:42

Member · 14 comments

any luck with duet board for screen  (without screen)?

Avatar

By njjn2020 19 April 2017 13:57

Member · 14 comments

by the way, is it possible to setup DuetWiFi without screen ?

Avatar

By dc42 19 April 2017 14:14

Administrator · 2,672 comments

Yes, you can setup Duet WiFi using a USB connection to a PC.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By T3P3Tony 19 April 2017 15:11

Administrator · 789 comments

It should be fixed, please check


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com

Avatar

By T3P3Tony 19 April 2017 15:11

Administrator · 789 comments

Also the product page for the PanelDue has been updated. IR probes will be back in stock soon


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com

Avatar

By T3P3Tony 19 April 2017 15:38

Administrator · 789 comments

IR probes are now back in stock


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com

Avatar

By njjn2020 20 April 2017 08:02

Member · 14 comments

please fix site authentication issue.

0) ID from forum does not work for shopping  (" Warning: The E-Mail Address was not found in our records, please try again!")

1) i have created different ID for shopping
2) forgot new password and used "reset password" form   
             response: " An email with a confirmation link has been sent your email address."
3) got link in the email and created new password
              response: " Password succesfully updated "
4) used my email (from newly created account) and new password to login - FAILED
              response: " Warning: No match for E-Mail Address and/or Password."

in fact, i tried changing password 3 times. all attempts failed.

Avatar

By njjn2020 20 April 2017 08:08

Member · 14 comments

meanwhile some tech questions (was not able to find on the site)

1) are all fans output for 5 volt ?

2) there are two "always ON fans". are they also 5v? do they  support PWM or other type of speed control?

3) accepting 0.9 deg motors means 24v power supply.
are there 12v outputs on the board (i need it for LED light)?

thank  you!

Avatar

By dc42 20 April 2017 08:46

Administrator · 2,672 comments

1. There is a jumper that allows you to set the fan voltage supply to either 5V or VIN. The jumper affects the voltage supplied to all fan outputs.

2. The always-on fan outputs do not support PWM.

3. There is no 12V output on the Duet. There is on the DueX expansion boards.


Duet WiFi hardware designer and firmware engineer
http://www.escher3d.com
https://miscsolutions.wordpress.com

Avatar

By njjn2020 20 April 2017 09:08

Member · 14 comments

thanks for answers.

please help me to fix login issue for shopping.  😁

Avatar

By T3P3Tony 20 April 2017 10:41

Administrator · 789 comments

Hi i have emailed you back.


Duet Wifi Hardware Designer
www.duet3d.com
www.think3dprint3d.com